UnionPay Certified Payment Terminal Board with GMS Option, WF-SPT-11, AndroidSBC, Bern

TL;DR: UnionPay Certified Payment Terminal Board with GMS Option

AndroidSBC export compliance briefing covering the smart payment terminal board family serving Bern, Switzerland. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Bern and Switzerland importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The WF-SPT line exists because payment hardware buyers in Switzerland rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Bern buyer picks the configuration rather than commissioning a new PCB. The qualification work happens on the Longgang bench with the actual printer mechanism, reader antenna and scan engine the Switzerland integrator intends to buy, and the current draw, the print speed and the decode result are written into the shipment file rather than left for the integrator to discover on site.

WF-SPT-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Switzerland importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Switzerland Buyers

Attended and unattended payment hardware share a board but not a duty cycle. The Bern buyer who specifies a single configuration for both usually ends up over-specifying the counter and under-specifying the kiosk.

Compliance is where a lot of cheap boards fail. The OFCOM CH file has to name the exact modem, the exact printer mechanism and the exact panel that shipped to Bern, and it has to be issued by a body the Switzerland acquiring partner recognises. The Hamburg - Zurich rail lane into Switzerland is a weekly service for AndroidSBC, and the 100200 board lot for Bern is the 9th shipment this quarter carrying the full compliance set rather than a partial file.

Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards

Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for Switzerland.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Bern buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Switzerland integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Bern is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The multimedia payment terminal build with customer screen sits in the middle of a market that is growing on formats rather than on unit replacement. Every new unattended format in Switzerland is a new terminal, and every new terminal is a board decision for Bern buyers.

• Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

Market growth in Switzerland does not automatically translate into margin for the integrator. The programmes that pay are the ones where the board arrives qualified, documented and repeatable, which is the gap AndroidSBC is built to close for Bern.

Partner Success Story: Danube Transit Payments (transit ticketing integrator)

When Danube Transit Payments reviewed the Central European transit market, the shortlist came down to whether a supplier would hold a configuration for the length of the agreement. Danube Transit Payments deployed 100200 WF-SPT boards across 44 transit stations.

• OEM relationship: AndroidSBC private-label SKU shipped with Danube Transit Payments branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.

Danube Transit Payments Systems Manager for Central European Transit: "Danube Transit Payments specifies the smart payment terminal board with the scan engine header, and 100200 units now handle QR tickets and card top-ups at Bern station gates."

Field Report: ticketing counter rollout at a cinema and stadium operator

YANTIAN, September 30, 2026 - Huan Xi, AndroidSBC field desk. The WF-SPT-11 multimedia payment terminal build with customer screen lot for Switzerland finished its burn-in run with the printer, the reader and the scan engine attached rather than on a bare bench, which is the only way the current draw numbers mean anything. The WF-SPT-11 payment terminal board order for Bern, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.

The WF-SPT-11 multimedia payment terminal build with customer screen production lot includes the WF-SPT-11-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.

Filed by Huan Xi, AndroidSBC field desk, YANTIAN. Swiss deployments carry four language packs, and the terminal build has to switch locale without a reflash.

WF-SPT-11 Application Scenarios

The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-05 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Bern Buyers

For Bern partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks ship from the same source factory with the same compliance file, which is why Bern partners can move between them as a Switzerland programme grows.

Frequently Asked Questions

Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?

Answer: Yes. AndroidSBC builds the multimedia payment terminal build with customer screen as part of the twelve-configuration WF-SPT family, so the board arrives with its test report, its certificate set and its signed firmware image for Switzerland.

Which configurations are available in the WF-SPT family for Switzerland buyers?

Answer: Twelve configurations span Rockchip H618 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.

What payment scheme certification support does AndroidSBC provide for Switzerland?

Answer: Certification support for Switzerland means OFCOM CH conformity documentation, CE marking with the OFCOM radio interface notification test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in Bern.

What is the minimum order quantity and the sample lead time for Switzerland?

Answer: The minimum for a customised build is higher than for a stock configuration, but a Bern buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the Switzerland integration plan.

How are firmware updates delivered to a Switzerland device estate after deployment?

Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so a Switzerland estate can be updated in waves rather than all at once, with a published maintenance window.

What shipping terms does AndroidSBC support for Switzerland orders?

Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Hamburg as the default port for Switzerland, and prepares the customs file before the container closes for Bern.

Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation

Every Bern programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM, ODM and private-label tracks are open for Switzerland. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and Bern partners own the channel.