RK3568 Guide Board Wholesaler, WF-G3601, AndroidSBC, Bern

TL;DR: RK3568 Guide Board Wholesaler

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Bern, Switzerland. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Bern and Switzerland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Bern and Switzerland development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. Certification, carton labelling and palletisation for Switzerland are prepared in Shenzhen by the export desk before the Bern shipment leaves, and the test reports stay versioned against the board revision.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Switzerland Buyers

The first obstacle for Switzerland buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Bern loading dock has different memory, a different display interface or a different Android build than the sample that was approved.

Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Bern, with OFCOM CH conformity and CE marking with the OFCOM radio interface notification documentation attached for Switzerland importers at Port of Hamburg. For Bern and Switzerland the Hamburg - Zurich rail lane remains the working option, and 178900 boards are booked on it as of September 18, 2026, the 9th such release this cycle.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

For Switzerland buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Bern integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a mall smart guide kiosk build has to host the content client, the touch stack and the update channel, which is exactly what Switzerland integrators in Bern are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC tracks these numbers for Bern and Switzerland planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Hanul Venue Services (mall and exhibition service provider)

The Hanul Venue Services case in the Korea commercial venues segment is a working example of how the WF-G family from AndroidSBC supports Bern integrators. Hanul Venue Services installed 178900 WF-G directory and exhibition guide boards across a commercial venue network.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Venue Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.

Hanul Venue Services Digital Operations Head for Korea Commercial Venues noted: Hanul Venue Services rolled 178900 units into its Switzerland venue estate because the directory and wayfinding interface on the WF-G board let each Bern site connect floor plans to tenant data without custom firmware work.

Field Report: floor guide counter installation at a community shopping mall

YANTIAN, Shenzhen, September 18, 2026 - Heng Yu, AndroidSBC field desk. Each WF-G3601 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for Switzerland shipment. The WF-G3601 smart guide kiosk Android motherboard order for Bern, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.

Filed by Heng Yu, AndroidSBC field desk, YANTIAN, Shenzhen. Switzerland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Bern.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Bern: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Bern Buyers

AndroidSBC runs three entry tracks for Bern and Switzerland partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The practical benefit for Bern and Switzerland is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with mall guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3568 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Switzerland?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Switzerland AndroidSBC bundles OFCOM CH conformity and CE marking with the OFCOM radio interface notification into the same carton that clears Port of Hamburg.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Switzerland team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Bern integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. For Bern distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the OFCOM CH conformity file and the commercial invoice prepared to the destination requirement in Switzerland.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Bern integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Bern and Switzerland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.