M.2 NVMe SSD Guide Board for Promotional Display, WF-G3600, AndroidSBC, Bern

TL;DR: M.2 NVMe SSD Guide Board for Promotional Display

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Bern, Switzerland. The WF-G3600 smart guide kiosk Android motherboard spans the dual-screen smart guide terminal and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual independent HDMI plus LVDS, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Bern and Switzerland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Bern integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Switzerland buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Bern and Switzerland catalogue SKUs.

WF-G3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3600 (dual-screen smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-G family, the WF-G3600-A variant is the typical configuration for the mall directory and promotion terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Switzerland Buyers

The third obstacle is certification sequencing. Switzerland customs and venue operators ask for different files, and a Bern programme that orders boards before the compliance dossier is assembled ends up storing stock it cannot install.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a Bern integrator writes the directory application rather than kernel patches for Switzerland sites. AndroidSBC booked 133200 boards for Bern and Switzerland on the Hamburg - Zurich rail lane as of September 18, 2026, the 9th release on this programme.

Competitive Comparison: WF-G3600 vs Competing Smart Guide Kiosk Android Boards

When Bern system integrators put the WF-G family next to a single-platform competitor, four differences show up repeatedly in Switzerland evaluations, and they are the differences that determine total cost across a multi-year venue estate.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Touch behaviour is the quiet driver. Visitors expect a directory to respond like a phone: multi-touch, portrait or landscape, anti-glare under retail lighting, and a route drawn on screen in under a second. As those expectations spread across Switzerland venues, the dual-screen smart guide terminal board has to carry a calibrated capacitive or IR controller alongside the display and the content client. Analysts tracking Bern deployments point out that boards with a bundled touch driver package shorten the acceptance path, which is often the longest single item in a kiosk handover.

• Mall floor directories and tenant finders: WF-G3600 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3601 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3601 and the industrial WF-G3602 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3602 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

None of this changes the specification logic: Switzerland venues still buy on touch response, thermal fit and update control, and the market data only sets the volume expectation for Bern.

Partner Success Story: Hanul Venue Services (mall and exhibition service provider)

A recent Hanul Venue Services deployment in the Korea commercial venues segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Bern integrators. Hanul Venue Services installed 133200 WF-G directory and exhibition guide boards across a commercial venue network.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Venue Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.

Hanul Venue Services Digital Operations Head for Korea Commercial Venues highlighted: Hanul Venue Services rolled 133200 units into its Switzerland venue estate because the directory and wayfinding interface on the WF-G board let each Bern site connect floor plans to tenant data without custom firmware work.

Field Report: directory and promotion terminal deployment at a downtown retail complex

LONGGANG, Shenzhen, September 18, 2026 - Cen Rui, AndroidSBC field desk. The WF-G3600 boards were burned in with the QR scanner, ID card reader and relay modules attached, so the dual-screen smart guide terminal driver chain was exercised end to end. The WF-G3600 smart guide kiosk Android motherboard order for Bern, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.

The WF-G3600 dual-screen smart guide terminal production lot includes the WF-G3600-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.

Filed by Cen Rui, AndroidSBC field desk, LONGGANG, Shenzhen. Switzerland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3600 Application Scenarios

The WF-G3600 dual-screen smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3600-A configuration is the typical build for the mall directory and promotion terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3600 plus WF-G3566 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3288 plus WF-G3600 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3399 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1330 plus WF-G3566 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3288 plus WF-G1330 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3566 plus WF-G3399 carry the guest orientation flow in Bern.
• Exhibition and museum interpretive display points: WF-G3600 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1330 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Bern: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Bern Buyers

For Bern integrators the practical question is whether to buy a catalogue SKU, a private-label SKU or a custom design; AndroidSBC supports all three on the WF-G family in Switzerland.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Bern and Switzerland buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen guide terminal?

Answer: Yes. AndroidSBC ships the WF-G family with dual-screen guide terminal as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Bern.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Switzerland?

Answer: Yes. For Switzerland buyers the standard bundle is CE / FCC / RoHS plus OFCOM CH conformity and CE marking with the OFCOM radio interface notification, routed through Port of Hamburg. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Bern.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Bern partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Bern integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Bern estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC supports FOB Shenzhen, CIF Port of Hamburg and DDP delivery into Amazon FBA or a consolidation warehouse, with serialised carton labels and the OFCOM CH dossier bundled for Switzerland.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Switzerland integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3600 Sourcing Conversation

For the WF-G smart guide kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Bern integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-G family.