RK3588 Custom COM Express Module, WF-C3588-A0, AndroidSBC, Bern

TL;DR: RK3588 Custom COM Express Module

SHENZHEN, China, September 12, 2026 - The WF-C3588-A0 board line at Wanlin Longgang closed lot 159 this week. 39,655 units are now booked for Bern, Switzerland, shipped FOB with the full certification file attached.

AndroidSBC field deployment report from active Rockchip RK3588 custom board projects serving Bern, Switzerland. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Bern buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for Switzerland OEM, integrator and distributor programmes. For a Bern buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.

WF-C3588-A0 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Switzerland importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-A0-B) variant is the typical configuration for the custom Android motherboard programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Android Motherboard for OEM and ODM Projects for Switzerland Buyers

Buyers in Bern who have sourced a custom android motherboard for oem and odm projects for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 39,655-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover custom Android motherboards, GMS-certified smart displays, commercial tablets, smart mirrors, OTT boxes, conference panels, smart home hubs, in-vehicle displays, and white-label Android terminals and each one carries three memory configurations, which keeps Bern and Switzerland buyers on standard custom SKUs for most requirements.

Buyers in Switzerland tend to ask about the local mark before they ask about price. In Switzerland the market follows CE-aligned rules without EU membership, and OFCOM registration applies to radio equipment. AndroidSBC handles that by preparing the destination-market file covering CE-aligned conformity with OFCOM radio interface registration administered by OFCOM alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane.

Competitive Comparison: WF-C3588-A0 vs Competing RK3588 Boards

Competing boards in the custom android motherboard for oem and odm projects category sort into three camps: cheap catalogue boards with no customization, re-badge imports with a sticker but no engineering file, and source-factory custom boards with the BSP, the certification and the test bench in one building. The WF-C3588-A0 is in the last camp, and its edge is Rockchip RK3588 plus a factory that will route the I/O the project actually needs.

• vs off-the-shelf Android boards: the WF-C3588-A0 starts from a reference design and takes custom memory, storage, display and firmware lines without an NRE penalty on standard variants.
• vs re-badge resellers: AndroidSBC controls the PCB, the PCBA line and the BSP, so a custom I/O change is a factory engineering change rather than a request passed to a third party.
• vs generic AOSP vendors: the GMS, EDLA and CTS track is pre-walked on RK3588 at the Longgang plant, which removes the certification loop that stalls most custom Android launches.
• vs short-line brokers: the seven-year supply commitment on the RK3588 platform is written into the framework agreement, not left as a verbal assurance.

Global Custom Android Motherboard and Smart Display Market Trends

The Custom Android Motherboard and Smart Display curve is what Switzerland importers read before committing to a custom android motherboard for oem and odm projects programme. The number they quote is the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), which serves as the closest public proxy for the silicon demand behind custom RK3588 boards. For Bern that resolves into three demand patterns across the WF-C3588 order book:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-A0 board carries that headroom without a board change.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.

What the Custom Android Motherboard and Smart Display data does not show is the operational cost of a supply break, which is why Bern buyers increasingly weight supplier continuity above a marginal price difference.

Across those three segments, Bern procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a custom Android, industrial, signage or robotics programme needs a twelve-month shipping window.

Partner Success Story: Argent Medical Imaging in Bern, Switzerland

Argent Medical Imaging, a medical device maker serving the Switzerland market, deployed 2,600 custom WF-C3588-M2 SMARC core boards for an imaging terminal programme. The rollout covered the gms-certified smart display, smart mirror and hospitality, and smart home hub workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 2,600 custom WF-C3588-M2 SMARC core boards for an imaging terminal programme
• Region: Bern, Switzerland
• Models used: WF-C3588-A0 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Rotterdam as the inland gateway via the Rotterdam to Yantian lane

"The module-plus-carrier split is what our regulatory file needed. We swapped the core board, kept the validated carrier, and the BSP port to our revision was handled in-house. The SI report and thermal map arrived as Longgang documents, not forwarded PDFs."

- Dr. Alan Whitmore, VP Engineering

Field Report: an engineering review at the Wanlin Longgang plant, where the Bern buyer team walked the WF-C3588-A0 carrier design through schematic and stack-up sign-off

Reporter Jiang Bo, on the ground in Bern, Switzerland. The buyer's hardware lead spent three days at Longgang reviewing the schematic, the stack-up, and the signal integrity report with the Wanlin engineering desk. Two net-class changes came out of the review and were folded into the next carrier revision before the tooling release.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-C3588-A0 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE-aligned conformity with OFCOM radio interface registration administered by OFCOM, cleared for entry at Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Switzerland importers can hand straight to their customs broker.

Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-A0 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) as the lead SKU for Bern and Switzerland programmes:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Commercial tablet programme: an OEM builds an 8GB + 64GB tablet variant with a custom boot animation and pre-installed estate software.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.
• OTT and streaming terminal: a pay-TV operator takes the Android TV build with DRM credentials burned per lot at Longgang.
• Conference room panel: an office AV brand pairs the board with a touch layer and a custom launcher for meeting room displays.
• Smart home hub: an IoT brand runs the hub image with Matter support and Bluetooth 5.3 provisioning out of the box.
• In-vehicle display: a fleet contractor takes the wide-temperature variant with a custom Android build for passenger information screens.
• White-label kiosk terminal: a self-service brand ships the board under its own logo with a kiosk-mode ROM burned at the factory.

Partnership Models for Bern Buyers

For Bern distributors and brand owners, AndroidSBC opens the custom android motherboard for oem and odm projects line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Bern buyers, a typical first order on the WF-C3588-A0 is the 8GB + 64GB (WF-C3588-A0-B) configuration at MOQ 5,000 units per shipment, with standard-variant samples in 1-3 days and 15-30 days to mass production on custom runs.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most Switzerland partners change two or three layers on a standard variant rather than commissioning a full custom run.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a Switzerland integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Switzerland, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Switzerland-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-A0 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-C3588-A0 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Bern and Switzerland looking to source the WF-C3588-A0 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE-aligned conformity with OFCOM radio interface registration for Switzerland, administered by OFCOM, entering at Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, customization scope and Incoterm. Provide those and a per-lot quote plus the WF-C3588 MOQ matrix comes back within two business days.