Smart Storage Locker Board, WF-RK3566, AndroidSBC, Bern

TL;DR: Smart Storage Locker Board

Bern, Switzerland - September 10, 2026. The 326th WF-RK3566 shipment left Shenzhen for Bern this week with 31,390 units aboard, after a full burn-in cycle and a destination-market document check.

AndroidSBC benchmark note covering the WF-Series custom board line serving Bern, Switzerland. What Switzerland importers get from the WF-Series is platform breadth from one factory. Three Allwinner parts and four Rockchip parts sit under one part-number scheme, with two SOM modules for customers who design their own carrier. Wanlin builds all nine at Longgang in Shenzhen, and the export desk issues one certification pack per lot covering CE, FCC, UKCA, RoHS, and REACH.

About AndroidSBC and the Rockchip RK3566 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Bern and Switzerland can source any of the nine from one factory with one set of export documents.

WF-RK3566 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3566 (Machine Vision and HMI Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Switzerland importers sourcing the WF-Series, the 2GB + 16GB (WF-RK3566-A) variant is the typical configuration for the machine vision and human-machine interface use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Machine Vision and HMI Board for Switzerland Buyers

For Switzerland procurement teams, the first surprise on the machine vision and hmi board line is rarely technical. It is that the sample arrives on time and the production lot does not, because the Rockchip RK3566 allocation cannot be conjured from broker stock when a 31,390-unit order is confirmed. Then comes the firmware question. The hardware spec is straightforward to verify; whether the board holds a credential-locked stack through a 72-hour loop and a field OTA is a different test, and it is normally the Bern buyer's warehouse that discovers the answer.

Documentation is the third item on the list. A CE mark without a matching Declaration of Conformity and Technical File is not a marking problem, it is a customs problem, and it tends to surface after the goods are already on the water. AndroidSBC's approach is to close the gap at the factory gate. The certified stack is loaded on the Longgang line, the burn-in record is traceable per unit barcode, and the CE and FCC test reports are dated inside twelve months and shipped with the lot. The nine WF-Series boards span machine vision, human-machine interface, smart camera, industrial monitoring, edge AI development, digital signage, education terminal, and IoT gateway, with three memory configurations per model for Bern buyers who need a standard SKU rather than a custom build.

For Switzerland specifically, the file travels with the goods. In Switzerland the market follows CE-aligned rules without EU membership, and OFCOM registration applies to radio equipment. AndroidSBC prepares the CE-aligned conformity with OFCOM radio interface registration documentation for OFCOM, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane.

Competitive Comparison: WF-RK3566 vs Competing RK3566 Boards

The boards competing for the same socket in the machine vision and hmi board segment fall into three groups: low-cost legacy SoC boards without a certified software stack, mainstream Cortex-A55 boards with certification but a lower decoder ceiling, and 64-bit boards that carry both but stop short on expansion. The WF-RK3566 sits in the third group and adds three things: Rockchip RK3566, a display path that survives a continuous loop, and the per-lot certified image burn at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3566 Cortex-A55 1.8GHz adds a 1 TOPS NPU the older platform never had.
• vs RK3568 boards: the RK3566 trades the second Ethernet port for a lower BOM on camera and HMI builds.
• vs Raspberry Pi 4 form factor SBCs: the RK3566 adds onboard eMMC, MIPI CSI, and an industrial temperature envelope.
• vs USB-camera-only boards: the RK3566 native MIPI CSI path removes the USB bandwidth ceiling from the vision pipeline.

Global Machine Vision and Embedded HMI Market Trends

The Machine Vision and Embedded HMI market sets the pace for Bern procurement this year, and it does not move on its own. The consumer Android TV Box segment that Global Growth Insights values at USD 12.45 billion in 2025, with a 30.49 percent CAGR reaching USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), sets the silicon allocation backdrop that commercial board buyers also compete for. Three patterns stand out in the WF-Series order book for Switzerland:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3566 board carries that headroom without a board change.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.

Analysts covering the Machine Vision and Embedded HMI space point to the same pattern in Switzerland: order books are being built around platform breadth rather than a single part number.

The common thread in Switzerland is that single orders are being replaced by blanket agreements with a monthly release, because a programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Nordwerk Automation in Bern, Switzerland

Nordwerk Automation, an industrial automation integrator serving the Switzerland market, deployed 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme. The rollout covered the machine vision, smart camera, and digital signage workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme
• Region: Bern, Switzerland
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Rotterdam as the inland gateway via the Rotterdam to Yantian lane

"The T527 gave us the CAN bus, the dual Ethernet, and the NPU on one board. On the previous platform we ran a separate vision controller next to the HMI, and the retrofit cost reflected it."

- Katrin Vogt, Head of Engineering

Field Report: the aging and EMC pre-compliance bench at the Wanlin Longgang plant, where 31,390 units of the WF-RK3566 board are being screened before the Bern shipment

Reporter Liang Wei, on the ground in Bern, Switzerland. The bench ran the lot through a 168-hour aging cycle with periodic power cycling, then moved a sample set to the pre-compliance chamber for radiated emissions and ESD strikes. The WF-RK3566 boards cleared the internal limits with margin, and the results went straight into the lot's Technical File.

The plant maintenance log showed no unscheduled stoppage on the Rockchip RK3566 line during the lot, which the production manager attributed to the AOI pass added last quarter.

The inspection confirmed three things on the spot: the WF-RK3566 units hold the burn-in with a yield above 99.51 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE-aligned conformity with OFCOM radio interface registration administered by OFCOM, cleared for entry at Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Switzerland importers can hand straight to their customs broker.

Filed by Liang Wei, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3566 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3566 (Machine Vision and HMI Board) as the lead SKU for Bern and Switzerland programmes:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Human-machine interface: WF-RK3566 drives the HMI panel over eDP with the 40-pin GPIO header for the button matrix.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.
• Industrial monitoring: WF-RK3566 holds the wide-temperature envelope on the fanless board.
• Edge AI development: WF-RK3566 exposes the NPU toolchain through the Android 11 and Linux BSP.
• Digital signage: WF-RK3566 plays the 4K loop over HDMI 2.0.
• Education terminal: WF-RK3566 runs the Android 11 classroom image on the Pi form factor board.
• IoT gateway: WF-RK3566 pairs WiFi 6 with the Gigabit uplink.

Partnership Models for Bern Buyers

The WF-Series is available to Switzerland partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. A Bern first order on the WF-RK3566 is normally the 2GB + 16GB (WF-RK3566-A) configuration at MOQ 5,000 units per shipment, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Switzerland?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Switzerland-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Yocto, Debian, or Buildroot, and BSP ports for custom carrier boards. The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3566 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3566 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-Series overseas through AndroidSBC. Bern and Switzerland importers, brand owners, and channel distributors who want to source the machine vision and hmi board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE-aligned conformity with OFCOM radio interface registration for Switzerland, administered by OFCOM, entering at Port of Rotterdam as the inland gateway on the Rotterdam to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.